C57100 / GB 6J13 Manganin Round Bar|CuMn12Ni 2

Product Overview

Manganin alloy rods (UNS C57100, GB 6J13) yog cov tooj liab zoo tshaj -manganese-nickel tsis kam alloys tshwj xeeb tsim los rau cov ntawv thov shunt resistor. Cov pas nrig no muaj qhov tshwj xeeb hluav taws xob ruaj khov, qhov kub tsis tshua muaj siab coefficient ntawm tsis kam (TCR), thiab thermal EMF tsawg, ua rau lawv zoo tagnrho rau siab - qhov tseeb tam sim no sensing thiab ntsuas daim ntawv thov.

 

Technical Specifications

Khoom siv	Cov ntsiab lus (%) Tolerance	Tooj liab (Cu) 84-86 ± 0.5	Manganese (Mn) 11-13 ± 0.3	Nickel (Ni) 3-5 ± 0.2	Hlau (Fe) Tsawg dua lossis sib npaug rau 0.5 -	Silicon (Si) Tsawg dua lossis sib npaug rau 0.1 -	Lwm yam Impurities Tsawg dua lossis sib npaug rau 0.2 -
Lub cev muaj zog	Qhov ceev: 8.4 g / cm³	Melting Point: 960-980 degree	Thermal conductivity: 22 W/m·K	Lub peev xwm kub tshwj xeeb: 410 J / kg·K	Coefficient ntawm Thermal Expansion: 18 × 10 ^ (-6) / degree
Cov khoom hluav taws xob	Cov Khoom Muaj Nqi Them Nqi Them Nqi Test Standard	Resistivity 0.44-0.48 μΩ·m ± 0.01 μΩ·m ASTM B193	Kub Coefficient (TCR) ± 20 ppm /℃± 5 ppm /℃IEC 60115	Resistivity 0.44-0.48 μΩ·m ± 0.01 μΩ·m ASTM B193	Thermal EMF vs Copper Tsawg dua lossis sib npaug ntawm 1.5 μV /℃- ASTM B77	Ntev - Lub Sij Hawm Stability Tsawg dua lossis sib npaug rau 0.02% / xyoo - -

 

Khoom Dimensions & Tolerances

Standard Qws Loj:	Customization Muaj:
Txoj kab uas hla (mm) Tolerance (mm) Txheem Length (mm)	Tshwj xeeb diameters: 2.0mm yam tsawg kawg nkaus rau 150mm siab tshaj plaws
5.0 - 10.0 ±0.02 1000-3000	Kev cai ntev: mus txog 6000mm
10.1 - 20.0 ±0.03 1000-4000	Tshwj xeeb kam rau ua: mus txog ± 0.005mm
20.1 - 50.0 ±0.05 500-3000	Qhov tshwj xeeb nto tiav: tig, polished, lossis hauv av
50.1 - 100.0 ±0.08 500-2000	-

 

Cov yam ntxwv ua haujlwm

Hluav taws xob ruaj ntseg:	Mechanical Properties:
Zoo heev tiv thaiv oxidation thiab corrosion	Kev mob Tensile Strength (MPa) Yield Strength (MPa) Elongation (%) Hardness (HV)
Tsawg kawg kuj drift dhau lub sijhawm	Annealed 380-450 150-200 25-35 100-120
Kev ua haujlwm ruaj khov hauv cov av noo sib txawv	Hard Drawn 500-600 450-550 8-15 150-180
Cov khoom sib xws thoob plaws qhov kub thiab txias (-50℃txog +150 degree)	--

 

Daim ntawv thov

Cov ntawv thov tseem ceeb:

Precision tam sim no shunt resistors, ntsuas hluav taws xob ntsuas, cov khoom siv saib xyuas lub zog, ntsuas cov qauv, kuaj cov qauv siv

 

Kev lag luam tshwj xeeb siv:

Kev Tswj Xyuas Zog:Ntse meter shunts, lub zog saib xyuas tshuab

Automotive:Roj teeb tswj systems, EV tam sim no sensors

Industrial:Lub cev muaj zog tswj tshuab, khoom siv hluav taws xob

Kev Sib Txuas Lus:Base chaw nres tsheb saib xyuas lub zog

 

Aerospace:Avionics tam sim no sensing

Khoom npe	Manganin pas nrig rau Shunt 6J13 bar
Product Description	Copper Nickel Alloy feem ntau yog ua los ntawm tooj liab thiab npib tsib xee. Cov tooj liab thiab npib tsib xee tuaj yeem yaj ua ke txawm tias feem pua. Feem ntau qhov kev tiv thaiv ntawm CuNi alloy yuav siab dua yog tias cov ntsiab lus Nickel loj dua cov ntsiab lus tooj liab. Los ntawm CuNi6 mus rau CuNi44, qhov resistivity yog los ntawm 0.1μΩm mus rau 0.49μΩm. Uas yuav pab tus resistor tsim xaiv cov hlau alloy uas haum tshaj plaws.
Khoom nta	Los ntawm txoj kev, tooj liab Nickel hlau yog ib qho yooj yim rau welded thiab yooj yim rau fabricated, yog li nws tuaj yeem ua rau ntau hom thiab siv dav hauv txhua qhov chaw.

Specification

Hlau	D=0.03mm ~ 8 hli
Ribbon	Dav =0.4mm-40mm, Thickness =0.03mm-2.9mm
Sawb	Dav =8mm-250mm, Thickness =0.1mm-3mm
Ntawv nyiaj	Dav =6mm-120mm, Thickness =0.003mm-0.1mm
Bar	Dav =8mm-100mm, Thickness =50mm-1000mm
Lwm qhov ntau thiab tsawg	Muaj raws li koj qhov yuav tsum tau ua

Cim npe nrov: c57100 / gb 6j13 manganin puag ncig bar|cumn12ni2, Tuam Tshoj c57100/gb 6j13 manganin puag ncig bar|cumn12ni2 manufacturers, lwm tus neeg, Hoobkas